BEC 6300VNL Manuel d'utilisateur télécharger pdf (Page 101)

Device Configuration /

Access Management

BEC 6300VNL User Manual

Source Port Number: The source port number of packets to be monitored. 0 means “Don’t care”.

Destination IP Address: The destination IP address of packets to be monitored. 0.0.0.0 means

“Don’t care”.

Destination Subnet Mask: Enter the subnet mask of the destination network.

Destination Port Number: This is the Port that defines the application. (e.g. HTTP is port 80.)

DSCP: DSCP: Differentiated Services Code Point, it is recommended that this option be configured by

an advanced user or keep 0. (0 means Don’t care.)

Protocol: Specify the packet type (TCP, UDP, ICMP, and ICMPv6) that the rule applies to.

IP/MAC Filter Listing

#: Item number.

Active: Whether the connection is currently active.

Interface: show the interface the rule applied to.

Direction: show the direction the rule applied to.

Source IP (IPv6) Address/Mask (Prefix): The source IP address or range of packets to be

monitored.

Destination IP (IPv6) Address/Mask (Prefix): This is the destination subnet IP address.

Source MAC Address: show the MAC address of the rule applied.

Source Port: The source port number of packets to be monitored.

Destination Port: This is the Port or Port Ranges that defines the application.

DSCP: show the set DSCP.

Protocol: It is the packet protocol type used by the application. Select either TCP or UDP or ICMP or

ICMPv6

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 121 122

Pas de commentaire

BEC 6300VNL Manuel d'utilisateur Page 101