BEC 6300VNL Manuel d'utilisateur télécharger pdf (Page 94)

Device Configuration /

Access Management

BEC 6300VNL User Manual

SNMP

Simple Network Management Protocol (SNMP) is a protocol used for exchanging management

information between network devices. SNMP is a member of the TCP/IP protocol suite. BEC 6300VNL

serves as a SNMP agent which allows a manager station to manage and monitor the router through

the network.

SNMP: Select to enable SNMP feature.

Get Community: Type the Get Community, which is the password for the incoming Get-and-GetNext

requests from the management station.

Set Community: Type the Set Community, which is the password for incoming Set requests from the

management station.

Trap Manager IP: Enter the IP of the server receiving the trap message (when some exception occurs)

sent by this SNMP agent.

SNMPv3: Enable to activate the SNMPv3.

User Name: Enter the name allowed to access the SNMP agent.

Access Permissions: Set the access permissions for the user; RO--read only and RW--read and

writer.

Authentication Protocol: Select the authentication protocol, MD5 and SHA. SNMP agent can

communicate with the manager station through authentication and encryption to secure the message

exchange. Set the authentication and encryption information here and below.

Authentication Key: Set the authentication key, 8-31 characters.

Privacy Protocol: Select the privacy mode, DES and AES.

Privacy Key: Set the privacy key, 8-31 characters.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 121 122

Pas de commentaire

BEC 6300VNL Manuel d'utilisateur Page 94