BEC 6200WZL Manuel d'utilisateur télécharger pdf (Page 22)

Factory Default Settings

Before configuring the router, you need to know the following default settings.

Web Interface: (Username and Password)

Username: admin

Password: admin

The default username and password are “admin” and “admin” respectively.

Device LAN IP settings

IP Address: 192.168.1.254

Subnet Mask: 255.255.255.0

DHCP server

DHCP server is enabled.

Start IP Address: 192.168.1.100

IP pool counts: 100

LAN and WAN Port Addresses

The parameters of LAN and WAN ports are preset at the factory. The default values are shown below.

LAN Port

WAN Port

IP address

192.168.1.254

The DHCP function is

enabled to automatically get

the WAN port configuration

from the ISP.

Subnet Mask

255.255.255.0

DHCP server function

Enabled in ports 1, 2 and 3

IP addresses for

distribution to PCs

100 IP addresses continuing

from 192.168.1.100 through

192.168.1.199

Attention

If you ever forget the username/password to login to the router, you may

press the RESET button up to 6 seconds then release it to restore the

factory default settings.

Caution: After pressing the RESET button for more than 6 seconds then

release it, to be sure you power cycle the device again.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 127 128

Pas de commentaire

BEC 6200WZL Manuel d'utilisateur Page 22