BEC 6200WZL Manuel d'utilisateur télécharger pdf (Page 67)

DHCP Server

You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or enable the

router’s DHCP relay functions. The DHCP protocol allows your router to dynamically assign IP

addresses to PCs on your network if they are configured to obtain IP addresses automatically.

DHCP Server Mode: Disable

To disable the router’s DHCP Server, check Disabled and then click Apply. When the DHCP Server is

disabled, you will need to manually assign a fixed IP address to each PC on your network, and set the

default gateway for each PC to the IP address of the router (the default is 192.168.1.254).

DHCP Server Mode: DHCP Server

To configure the router’s DHCP Server, check DHCP Server. You can then configure parameters of

the DHCP Server including the IP pool (starting IP address and ending IP address to be allocated to

PCs on your network), lease time for each assigned IP address (the period of time the IP address

assigned will be valid), DNS IP address and the gateway IP address. These details are sent to the

DHCP client (i.e. your PC) when it requests an IP address from the DHCP server. Click Apply to

enable this function. If you check “Use Router as a DNS Server”, the 3G / 4G Router performs the

domain name lookup, finds the IP address from the outside network automatically and forwards it back

to the requesting PC in the LAN (your Local Area Network).

DHCP option 66: This option is used to identify a TFTP server for convenient configuration

downloading for clients. Please Enable to use option 66 and enter the TFTP server IP or domain

name.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 127 128

Pas de commentaire

BEC 6200WZL Manuel d'utilisateur Page 67