BEC 6200WZL Manuel d'utilisateur télécharger pdf (Page 43)

Step 3: WAN have been successfully configured, and move on to wireless settings.

Step 4: In the previous step, press Next to Wireless to set Wireless configuration. (By default, the

wireless is disabled, please enable and configure.)

WLAN Service: Default setting is set to Disable.

ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from

another. For security propose, change to a unique ID name to the AP which is already built-in to the

router’s wireless interface. It is case sensitive and must not excess 32 characters. Make sure your

wireless clients have exactly the ESSID as the device, in order to get connected to your network.

Channel ID: Select the ID channel that you would like to use.

Regulation Domain: There are seven Regulation Domains for you to choose from, including North

America (N.America), Europe, France, etc. The Channel ID will be different based on this setting.

Security Mode: You can disable or enable with WPA or WEP for protecting wireless network..

WPA Pre-Shared Key

WPA Shared Key: The key for network authentication. The input format is in character style and the

key size should be in the range between 8 and 63 characters (here the default is the router or CPE’s

MAC address in uppercase).

WPA2 Pre-Shared Key

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 127 128

Pas de commentaire

BEC 6200WZL Manuel d'utilisateur Page 43