BEC 6200WZL Manuel d'utilisateur télécharger pdf (Page 28)

Netmask: The default is 0.0.0.0. User can change it to other such as 255.255.255.0.Type the subnet

mask assigned to you by your ISP (if given).

Gateway: You must specify a gateway IP address (supplied by your ISP)

PPPoE

PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using

PPP.

Protocol: The current ATM protocol in the device

Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric

characters (case sensitive). This is in the format of “username@ispname” instead of simply

“username”.

Password: Enter the password provided by your ISP. You can input up to 128 alphanumeric

characters (case sensitive).

Service Name: Enter a name for this connection.

IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP address from

your ISP.

Auth. Protocol: Default is Auto. Your ISP advises on using Chap or Pap.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 127 128

Pas de commentaire

BEC 6200WZL Manuel d'utilisateur Page 28