BEC 6200WZL Manuel d'utilisateur télécharger pdf (Page 73)

Fixed IP Address (EWAN)

Select this option to set static IP information. You will need to enter in the Connection type, IP address,

netmask, and gateway address, provided to you by your ISP. Each IP address entered in the fields

must be in the appropriate IP form, which is four IP octets separated by a dot (x.x.x.x). The Router will

not accept the IP address if it is not in this format.

Line Speed: Set the downstream and upstream of your connection in kilobytes per second. The

connection speed is used by QoS settings.

NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet

through a single IP account, sharing a single IP address. If users on your LAN have public IP

addresses and can access the Internet directly, the NAT function can be disabled.

IP Address: Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP address from

your ISP.

IP Netmask: The default is 0.0.0.0. User can change it to other such as 255.255.255.0.Type the

netmask assigned to you by your ISP (if given).

Gateway: You must specify a gateway IP address (supplied by your ISP)

Obtain DNS Automatically: Select this check box to use DNS.

Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers are

passed to the DHCP clients along with the IP address and the netmask.

MAC Spoofing: Select Enable and enter a MAC address that will temporarily change your router’s

MAC address to the one you have specified in this field. Leave it as Disabled if you do not wish to

change the MAC address of your router.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 127 128

Pas de commentaire

BEC 6200WZL Manuel d'utilisateur Page 73