BEC 6200WZL Manuel d'utilisateur télécharger pdf (Page 50)

Wireless

Parameters

WLAN Service: Default setting is set to Disable.

Mode: The default setting is Wireless G + N (Mixed mode). If you do not know or have both 11g and

11n devices in your network, then keep the default in mixed mode. From the drop-down manual, you

can select Wireless – G if you have only 11g card. If you have only 11b card, then select Wireless – B.

If you have only 11n card, then select Wireless – N.

Number of Active SSID: Number of SSID you can choose.

SSID No.: The SSID you choose.

ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from

another. For security propose, change to a unique ID name to the AP which is already built-in to the

router’s wireless interface. It is case sensitive and must not excess 32 characters. Make sure your

wireless clients have exactly the ESSID as the device, in order to get connected to your network.

Note: ESSID is case sensitive and must not excess 32 characters.

Hide ESSID: It is function in which transmits its ESSID to the air so that when wireless client searches

for a network, router can then be discovered and recognized. Default setting is Disable.

 Enable: Select Enable if you do not want broadcast your ESSID. When select Enable, the

ESSID will be hidden instead of broadcasting, thus when wireless client searches for this AP, failure

occurs. This ESSID(AP) will be invisible to you. In this case, if you want to join this wireless network,

enter the exactly ESSID manually and some security settings.

 Disable: When Disable is selected, the router will broadcast the ESSID to allow anybody with a

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 127 128

Pas de commentaire

BEC 6200WZL Manuel d'utilisateur Page 50